The Ultimate 2020 - 21 KTM 500 EXC-F and Husky FE-S 501 Bike Build

A very common question we get from riders who are planning to buy a new bike is this:

“Which is better? The new 2020’ bikes, or the 2017-19’s?”

The answer is, they both can be made spectacular.

The new 2020’s put out quite a bit more power for less money, because of the new cylinder head and higher compression.

Also, after riding both in enough back to back situations, there’s an added feeling of confidence you get from the 2020 bike’s newer frame and suspension.

In our opinion, that extra bit of power and performance improvement is worth paying the extra money for.

If you don’t have the opportunity to experience the new 2020 KTM / Husky bikes for yourself, watch the videos on this page and on our YouTube Channel. They are amazing!

Let’s dive into the Ultimate 2020-21 KTM 500 EXC-F / Husky FE-S 501 Bike Build

Why We Created These Products

If you’re like us (and most others who recently spent a lot on a new KTM or Husky) you probably thought your new bike was just going to run perfectly all the time with no problems...Boy did we get suckered!


Based on our experience, here’s what you’re most likely finding:

  • The bike feels really plugged up due to the intake and exhaust restrictions.

  • Your bike runs lean in fuel.

  • Your bike and exhaust are getting excessively hot when riding.

  • The throttle is less responsive than you expected.

  • The bike like to flame out and stall.


If this sounds about right, then it’s not just your imagination.

And if you just keep riding your bike hard with all the stock parts… you may cause yourself some expensive problems like:

  • Damaging expensive or hard to replace parts.

  • Injuring yourself because your motorcycle stalls at the worst times, or just isn’t as responsive as it needs to be in certain situations.

  • Overheating, breaking parts, and getting stranded in the middle of nowhere.


So the whole existence of this site… is to help you fix all the annoying problems you just inherited, at the most cost effective prices possible so you can be in love with your new bike (instead of frustrated or disappointed).

These products are all designed by real riders, for real riders. All we do day in and day out, is address these issues by creating the most innovative products, that you won’t find anywhere else on the market.

Not to mention, everything we do is tested and verified on the dyno, which is the only way to really know how well a product performs.

So now let’s take a look at how plugged up the new 2020 KTM/Husky's really are, compared to the horsepower gains you’ll get when compared to the bikes with our kits installed.

*For testing, the rear tire was replaced with a street tire, and was ran with 100% wide open throttle.

The red line above shows the power and torque numbers from a stock 2020 500 EXC-F at wide open throttle in 4th gear. It’s making about 54 horsepower stock.

The blue line is how much power you can get out of the bike with our kits. Which is about 70.6 horsepower!

That’s a HUGE 16-hp gain considering the size and weight of these newer bikes. Just looking at these power curves above should get your blood pumping, when you imagine how strong and healthy your motor is going to pull.

So now that you can see what the dyno chart confirms, let’s cover a question that many riders ask when buying products from this site.

How To Approach Your Ultimate Bike Build

There are two ways to go about things when you build your dream bike, and we suggest option one below. Because why toe dip, if you can afford to dive right in and get everything your bike needs.

Here’s your options:

1) Buy the most “Premium” bundle kits you can afford. You’ll save lots of money and get the most bang for your buck performance-wise, for a completely transformed bike - all in one shot!


2) Buy the individual components. This method let’s you save up while you build your bike a few parts at a time, and learn about all the performance improving mods you can add to your bike over time.

Just keep in mind, when you start modifying things, you may need other components for them to work optimally. So if you plan to RIDE your bike right away, rather than just add parts in the garage as a fun project… then we highly suggest the bundle kits.

So the next few kits below are our most premium bundle kits we recommend because they’re what we use on our own bikes. They contain every single component we make for the Ultimate Bike Build, and they complement each other perfectly.

*We understand some people only want to add small things like fuel filters, especially if you live in certain parts of the world where fuel quality is an issue. We made those smaller options available by themselves, and you can find those further down the page.

OK, let’s get started!

Power Bundle + Fuel Programmer Kit

If you’re ready to invest a little more in your bike, so you can get it to perform the way you expected it to when you bought it, this Power bundle + fuel programmer kit will get you there the fastest!

Installing this kit will absolutely transform your bike, and leave you wondering how you ever rode your bike without it. Here’s a quick peek at what’s in the kit, but the rest of the page will go in more detail on each individual component.

Power Bundle with black end cap  2020-21  500 EXCF / 6 days / 501 FE-S

Power Bundle with black end cap 2020-21 500 EXCF / 6 days / 501 FE-S

Out of Stock
Power Bundle silver end cap 02 delete 2020-21  500 EXCF / 6 days / 501 FE-S

Power Bundle silver end cap 02 delete 2020-21 500 EXCF / 6 days / 501 FE-S

Out of Stock

If you already have an aftermarket exhaust, and you want to save a few bucks, you can pick up the Power Bundle with No End Cap Below. And in case you’re wondering, the programmer works great with any aftermarket exhaust just as well as it does with our End Cap.

Power Bundle / No End Cap for 2020-21  500 EXC-F / 6 days / 501 FE-S

Power Bundle / No End Cap for 2020-21 500 EXC-F / 6 days / 501 FE-S

$520.00Regular Price$485.00Sale Price

Alright, now the next few kits are what we would still consider part of our premium bundle kits for the Ultimate Bike Build because they go perfectly with the first kit above. Read on below to see if you want to add them to your cart before checking out.

Clutch Cover and Clutch Weight Bundle

Large capacity clutch covers and clutch weights are gaining popularity because they keep your clutch components protected and healthy for longer, and they keep your motor running better by preventing your bike from stalling or flaming out.

So let’s take a look at them one at a time, and we’ll cover how they work together perfectly.


The Clutch Covers


Our Big Oily Clutch Cover is made from billet aluminum and offers superior protection against impact damage. It also allows you to add up to 9 more ounces of clutch oil!

The main benefit of having more clutch oil is having more space for metal fragments to move away from moving parts, reducing long-term wear and tear.

Most importantly, it gives you enough space to fit our large 15.8 Ounce Clutch Weights! (more on those in a moment)…

If you look at the pictures above, you’ll see they are designed for ultimate durability to protect your bike.

You’ll notice we also dded an additional reservoir at the bottom, to trap any loose metal shaving debris floating around in the clutch oil.

This will increase the life of your clutches moving parts. You can get the Big Oily Clutch Cover by itself elsewhere on our site for only $149.95… but for our suggested Ultimate Bike Build we highly recommend getting the bundle pack with the clutch weights below.

The Clutch Weights


Clutch Weights have become a favorite for riders because they add significant rotational mass to your engine, which makes for less flame outs and better bottom end traction.

The image on the left is the clutch in stock form. And on the right is one of our cutch weights bolted on the outside of the stock clutch assembly.

If you’re mechanically inclined enough to remove a clutch cover, tighten a few bolts, and replace the oil… this product is a must-have.

We offer two different sizes:

  • 15.8 oz. Clutch weight (this is our most popular clutch weight size for a 500 cc bike, and it only fits inside our Big Oily Clutch Cover mentioned above).

  • 11.2 oz. CLUTCH WEIGHT (a lighter but still effective clutch weight that works with your stock clutch cover)

At this point, all you really need to know is which size is best for your bike.

The larger 15.8 clutch weight size helps with throttle control, traction, and the herky-jerkyness these 500 cc bikes seem to have, and significantly reduces flame outs and stalling.

But it’s really just a matter of preference, and most people buy the 11.2 oz. clutch weight because they want a safe “middle of the road” option, that works best for most situations (especially tight single track).

You can get the Big Oily Clutch Cover and Clutch Weights bundle pack (in the 15.8 or 11.2 ounce option) below for only $174.95:

Big Oily / 15.8 oz clutch weight combo for 16 -21 450 SXF/XCF/FX/FC

Big Oily / 15.8 oz clutch weight combo for 16 -21 450 SXF/XCF/FX/FC

$179.95Regular Price$149.95Sale Price
Big Oily / 11.2 oz Clutch Weight / Clutch Cover Combo for 2017-20 500 / 501

Big Oily / 11.2 oz Clutch Weight / Clutch Cover Combo for 2017-20 500 / 501

$174.95Regular Price$149.95Sale Price

The NEW 9 oz. Clutch Weight


If you want to save a few dollars, our 9 oz. clutch weight still works great, and it can be used without adding the big oily clutch cover.

Think it’s too good to be true? To see a video of a 2020 500 EXC-F riding up a steep hill, using the 9 oz. clutch weight (without stalling and at very low RPM’s) check out the video here.

We shaved down the size to work with your stock clutch cover, but it performs much better than not using a clutch weight at all. So if you’re on a budget, we’ve got you covered.

And as a way of saying thanks to all our loyal customers, the discounted price for the first 25 sold is only $39.95.

9 oz Clutch Weight for 2020 500 EXC-F / 501 F-S

9 oz Clutch Weight for 2020 500 EXC-F / 501 F-S

$49.95Regular Price$39.95Sale Price

In-Tank Fuel Filter


One of the biggest frustrations we hear from riders and professional race teams is the inadequacy of “stock” in-tank fuel filters.

In case you don’t know what they are, they are like the first line of defense for the fuel entering your bike.

Not only are the stock in-tank fuel filters a small size and low filtration level for these bikes - sooner or later they will split from the fuel injection pressure and break inside your tank - which means you’re going bike is going to be running poorly or not at all!

Take a look at how our yellow filter looks, compared to the stock brown one in the image below.

You’ll notice ours has twice the surface area. It’s also a much more appropriate 10 micron filter. Cars use 5 micron filters, and the stock ones in your bike use 40 micron. So obviously that’s letting way too large of particles through.

There’s a few other filters on the market that may seem like they would work, but be careful because they most likely can’t handle the 50 psi pressure the fuel injection system uses.

So unless you want to possibly take a long walk home because your stock filter blew apart for no reason, then we suggest just getting our tried-and-true filter replacement.

Next let’s talk about the crappy stock fuel pump that will also cause you issues or failures.

You can pick it up below for only $89.95

In-Tank Billet Fuel Filter / Mahle KL97 Replacement

In-Tank Billet Fuel Filter / Mahle KL97 Replacement

$94.95Regular Price$84.95Sale Price

Fuel Pump

The stock fuel pumps that come on the new bikes are made in China and don’t work very well. Our fuel pumps are much better in quality, performance, and reliability.

And it’s almost impossible to find a better solution anywhere, so we sourced our In-Tank Fuel Filters from Taiwan, because the ones from China are no good.

Also - we test each fuel pump before shipping it out to you, just for quality assurance.

You can pick it up below for only $89.95

2012-21 KTM / Husky Fuel Pump For 250 / 350 / 450 / 500 / 501 Four-Strokes

2012-21 KTM / Husky Fuel Pump For 250 / 350 / 450 / 500 / 501 Four-Strokes

Out of Stock

 The "In-Tank Fuel Filter / Fuel Pump" Bundle

You can get the In-Tank Fuel Filter and the the Fuel Pump separately, or together in our bundle.

You can pick it up below for only $149.95

2012-21 KTM / Husky "Big Filter" Fuel pump bundle 250-501 four stroke

2012-21 KTM / Husky "Big Filter" Fuel pump bundle 250-501 four stroke

Out of Stock

Now that we’ve covered everything inside the fuel tank, let’s go over the fuel system outside the bike.

Fuel Line Bundle


Next is this fuel bundle kit we offer, and explain each of the parts and why they can help you.

First is the High Flow 90-Degree Fuel Fitting we make.  It's important because the stock 90 degree fitting, just can't keep up with fuel flow, when needed. If the stock 90 is causing a 350 FE model to lean out at only 9,000 rpms, you can bet it's holding this thing back at it's 13,000 rpm top end.  It only starts to back up after about 3 seconds of being held wide open.

Second thing in line is the Large Area Quick Disconnect Fuel Filter you see. It's much more free flowing than the stock part, and also has a 10 micron screen in it thats 6 times larger than the stock filter, so it won't get the dreaded "clog and bog" out on the trail.

Last is our now famous Fuel Rail. It gives you a straight shot of fuel to the injector, instead of a restricted flow of fuel, which helps everything from starting, to response, to get up and and go, to lowering stalling and flameouts. 

You can pick it up below for only $149.95

Fuel Bundle #1 for 2017-21  EXC / FE / XCF-W / FE-S

Fuel Bundle #1 for 2017-21 EXC / FE / XCF-W / FE-S


Anti-Vibration Wheel Balancing Weights

If you’re making your bike faster... you're definitely going to want to add our stainless steel WHEEL BALANCING WEIGHTS, to eliminate speed wobbles!

Just like with the 2012 - 2016 bikes, KTM and Husky still insist on putting the rim lock and valve stem close together. This makes the wheels unbalanced causing them to shake your bike around at speeds over 50 mph (which is obviously unsafe).

Our wheel weights bolt right onto the spokes, directly across from the rim lock and valve stem to balance the front and rear wheels enough to smooth out your ride up to 100 mph.

And they're designed to stay in place even in extreme off-road conditions!

I suggest grabbing a set of our WHEEL BALANCING WEIGHTS if you plan to ride on the street over 50 mph. You can buy them below for only $14.95 each

Wheel Weight for Balancing (All 2012-20 KTM/Husky Bikes)

Wheel Weight for Balancing (All 2012-20 KTM/Husky Bikes)

Out of Stock

The Best Radiator Guards and Braces

Now for the final piece to protect your Ultimate Bike Build… our Radiator Guards and Radiator Guard Braces are better than ANYTHING you’ll find on the market.

Not only are these radiator guards extremely durable, but the braces that hold them on, are designed to NOT rip off your radiator guards even in the roughest situations and crashes.

You can buy this practically indestructible pair below for only $184.95 and $59.95.

Radiator Guards for 2017-21 EXC-F /XC-W in Black

Radiator Guards for 2017-21 EXC-F /XC-W in Black

Out of Stock

No product

No product

Radiator Guards for 2017-20 FE / FE-S in Blue

Radiator Guards for 2017-20 FE / FE-S in Blue

Out of Stock