- On the 2020 to 22 bikes, you will have to remove the 3small steel plates inside your stock clutch cover, if using the stock cover and if they are there. Some bikes may not have. The weight still may rub on the screw bosses, so it's up to you to check and remove material if needed. Or just use our bigger clutch cover.
Also, you must use the bolts provided and not the stock bolts
The standard Clutch Weight is designed to work with the STOCK DDS diaphragm style Clutch. This Weight weighs 9 oz.
You just remove your existing 6 bolts that hold the assembly together and then place the Weight on the outside of the big washer and re use the stock bolts. Done. You can just lay the bike on it's side then remove the Clutch Cover and install it. Done in minutes. Adds rotating Weight for increased traction. No one has reported that this Weight created a loss of acceleration or top end.