This item is expected to ship between Aug 1st and 5th    

     You CAN use the complete stock reed block with this, or the moto tassanari V force reed block.  You can see that using the whole reed block DOES push the  TPI block into the bracket of the oil pump.  You may want to remove the bracket if concerned.

     This is the exact same block as the other ones, so you can try with the whole block or just the stock cage

 

        Includes the Quick disconnect large area filter and high flow 90 degree gas tank fitting, for zero fuel flow issues at all rpm's.

      There are 50 on the way, so best to just order now before gone.

      This product makes the TPI bikes into the way they should have been made.  This product is just the block and injector plugs you see in the second pic. It doesn't include the reed block or injectors.

      This does come with a throttle plate adjusting screw.  This way you can replace your stock (loctited in place ) set screw, and finally control the idle speed correctly.  A big improvement over stock idle.

          You re-use your stock parts there. See Installation Video & Instructions Here

       You can see the dyno proven top end power increase, and there is an increase everywhere.  Also there is a mileage increase of around 5 miles to a tank of gas

     By moving the injectors before the reed cage, the fuel can now mix with the oil and air, BEFORE it enters the engine. Just like all carburated bikes before. Now the crank can get lubed, and the top end, before the bike starts.  Not only does it keep the cylinder and crank from running without lubrication at every start up, power from idle to wide open goes up as well.  Works with stock or aftermarket ( GET ) ecus. 

TPI Injector relocation block for V force reeds with filter/tank fitting 2020-22

$239.95 Regular Price
$219.95Sale Price